Blog

A look at local industry in Stoke-on-Trent and North Staffordshire and some of our recent projects close to home, including the mortuary at Stoke hospital.

De-icing salt carries chlorides into concrete car park decks and corrodes the reinforcement. How deck coatings, waterproofing and regular inspection help protect them.

London's commercial and industrial buildings face a demanding combination of high footfall, tight space, and strict compliance requirements — from...

Manchester's warehouses, factories, and commercial units put flooring under constant pressure — forklift traffic, chemical spills, heavy footfall, and round-the-clock...

Moisture in concrete is a leading cause of blistering and delamination in resin floors. How slabs are tested and what to do when readings are too high.

Planning resin flooring work for a summer shutdown? How surveys, preparation, system choice, cure times and phasing decide how quickly a factory floor can be installed.

How floor markings support forklift and pedestrian safety in UK warehouses, from separating walkways and choosing colours to making line marking last under heavy traffic.

What do environmental health requirements mean for commercial kitchen floors? A practical guide to hygiene, drainage, slip resistance and choosing a resin system that stands up to heat and grease.

Planning a resin bound driveway this spring? Here is what to know about weather, getting the base right, permeability and the planning rules for front gardens in England.

From seamless surfaces and coving to drainage falls and standing water, here is what BRCGS auditors and EHOs typically check on food factory floors, and how to prepare.

It's one of the most common questions we get asked before a project starts: how long will we be off...

A plain-English comparison of epoxy, polyurethane and polyaspartic resin floors, covering thermal shock, chemical resistance, UV stability and cure speed to help you choose the right system.

Resin flooring can be installed in winter if air temperature, substrate temperature and dew point are controlled. Here is how heating, dehumidification and fast-cure systems keep a cold-weather project on track.